The Frame only looks like art if it sits flush to the wall with no visible cables. We mount Samsung Frame TVs across Phoenix using the No Gap Wall Mount, conceal the One Connect cable, and set up Art Mode so it actually looks like a framed picture.
A Samsung Frame TV isn't just another wall mount job. Getting that flush, gallery-quality finish takes four things most standard installs don't require.
The Frame TV sits just 3mm from the wall thanks to Samsung's proprietary bracket. Unlike standard mounts that leave a 2-to-4-inch gap, this bracket requires precision alignment at every step. The template must be perfectly level and stud locations mapped exactly.
All HDMI devices, power, and processing run through a single external box connected by one nearly invisible cable. Where you place that box determines whether the install feels clean or cluttered. We plan the location during the walkthrough so it stays accessible but hidden.
The One Connect cable can be routed inside the wall cavity for a true zero-cable look. We cut in a recessed outlet behind the TV and bring the cable through to the One Connect Box location, leaving nothing visible but the screen and its frame.
After the physical install, we configure brightness, color tone, and motion sensitivity settings so Art Mode displays your chosen artwork naturally. We'll also walk you through the Samsung Art Store and show you how to upload your own photos.
The Frame TV shines in open-concept living spaces where the TV stays visible even when it's off. We've installed it in modern high-rise condos in Downtown Phoenix, historic homes in the charming Willo district, upscale estates in the Biltmore area, newer builds in Desert Ridge, and the scenic neighborhoods of Ahwatukee Foothills. Block, stucco, steel studs, and fireplaces are no problem: we use the right anchors, route the One Connect cable cleanly, and make sure the TV sits flush against any surface. Looking for standard TV mounting instead? See our TV mounting in Phoenix page.
Open floor plans with floor-to-ceiling windows where the TV is always on display. The Frame turns it into art.
Brick, stone, or tile. We anchor securely and route the One Connect cable so nothing interrupts the mantel line.
Older walls with plaster, lath, or unconventional stud spacing. We've seen it all and bring the right hardware.
We install hundreds of these and believe in setting honest expectations. Here's the real story.
Premium pricing. The Frame costs 20-40% more than a comparable QLED without the art features. You're paying for the flush mount, the matte screen, and the gallery aesthetic.
Art Mode uses power. Displaying artwork still draws electricity. It's efficient thanks to the motion sensor that turns it off when the room is empty, but it's not zero.
The bezel sells the effect. The magnetic customizable frames cost $100-$200+ and are what make the TV read as art. Without one, it still looks like a TV sitting flat on the wall.
Outlet placement matters. For the cleanest look, you need a recessed outlet directly behind the TV. If there isn't one, we can add it, but it's worth planning ahead.
Fixed position only. The No Gap mount doesn't tilt or swivel. Once it's on the wall, that's the viewing angle. Make sure you're happy with the height before we drill.
Professional install recommended. These TVs weigh over 50 lbs and the 3mm flush tolerance leaves almost no margin for error. We see DIY attempts that end up crooked or with visible cable slack.
Phoenix wall construction matters. Many Phoenix homes are built with concrete block rather than wood framing, so running the One Connect cable inside the wall is not always possible the way it is in a stud framed house. In block wall situations we may use a surface raceway or route through an alternate path, and we'll let you know what's realistic before we start. Newer Phoenix builds often use steel studs, and historic districts like Willo have plaster and lath.
Real reviews from real customers
"Absolutely fantastic service! They mounted my 65 inch TV perfectly here in Phoenix and the technician was professional and efficient. The cable management looks amazing."
"I was nervous about mounting my TV above the fireplace, but these guys made it look easy and safe. Clean work, professional attitude, and great communication throughout the process."
"Super satisfied with our tv mounting services here in Phoenix!"
Real Frame TV installs. Flush to the wall, no visible cables, ready for Art Mode.
Get answers to the most common questions about Samsung Frame TV installation
Our installation experts are here to help answer any questions about your Frame TV project
Tell us about your TV and we'll get back to you with a quote.
We'll reply with pricing and next steps
No problem! Fill out this short form and we'll get back to you with a quote.
If you prefer to get a quote or book online please click here: